the grammar being wrong also bothers me

  • dorkage@lemmy.ca
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    3
    ·
    2 days ago

    You are just making completely wild guesses here.

    1. Encoding is not done on the memory card. It’s done on either the system on a chip of the camera or a dedicated encoding engine in the camera.
    2. The 20 minute limit isn’t a size limit it’s a time limit that prevented it being classified as a Video Camera.
    3. TVs now don’t get sync from the mains. They all use universal power supplies that don’t care about which frequency or voltage they are connected to.

    Seriously you sound like a LLM stuck in a hallucination.

    • dual_sport_dork 🐧🗡️@lemmy.worldM
      link
      fedilink
      arrow-up
      1
      ·
      18 hours ago

      I was originally going to make a pithy comment here about how televisions never derived their sync frequency from the mains because I know full well that the sync pulse for analog television is sent along with the video signal from the transmitter and the TV is slaved to it. In the absence of this TVs from my era had their own oscillators that generated the appropriate sync frequency which may or may not have been in phase with the frequency of whatever it was they were trying to receive, and thus also a sync splitter circuit that attempted to switch the start of frame to be in lockstep with either the sync pulse from the station if it was strong enough and the internal timing when it wasn’t. The whole point of this was to be able to display at least some manner of intelligible image to the user as an aid to getting the station tuned in.

      But then I remembered a key phrase there, which was televisions from my era.

      (This is all just whiffling and is completely irrelevant to photography, so everyone who isn’t specifically interested in this rather off-topic diatribe is encouraged to ignore it.)

      I had apparently blocked out the memory that prewar television sets in fact did derive their frequency from the mains. As it happened this turned out to be exactly as stupid of an idea as you think it was. Foremost isn’t actually the obvious consideration that the mains frequency isn’t all that accurate to begin with, but rather it’s the fact that it is spectacularly unlikely to be in phase with the frequency of whatever transmitting tower your TV is listening to. One which would of course be any arbitrary distance away, and not even guaranteed to be on the same grid. These interactions resulted in the appearance of “hum bar” artifacts on your screen where the refresh cycles didn’t quite line up. Sometimes these could be tidied away into an inconspicuous or even off-screen area with careful tuning (compensating for this sort of thing is part of what the old vertical and, ye gods forbid if we’re going back that far, horizontal hold knobs on old television sets were for), but if you were particularly unlucky due to wandering frequency timings they’d be rolling up and down your screen constantly.

      Obviously the entire industry was keen to do away with this nightmare as soon as it was technologically feasible, and when transistors came about they sure did.

      Once NTSC color came along they didn’t have a choice anyway, because the cycle frequency of color television isn’t 60hz like the mains anymore. In order to leave room — or rather time — for the colorburst signal, the frequency of not-actually-modern-anymore NTSC television is actually 59.94hz. So if you’ve ever wondered where that weird frame rate still available in all your video editing software comes from, now you know.

    • dustyData@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      2 days ago

      I know it is fashionable to be mad at people online, and call bullshit and throw insults like little children on a playground, but several things:

      This is a video limitation, not shutter speed for still pictures. When you go from a physical shutter to a rolling shutter, the transistors on the CMOS sensor have to be coupled to a specific clock, at which rate they can flush voltage to the video processor. That clock conditions everything, and this specific camera obviously has some clock lock step somewhere in the video processing chain that affect writes to disk because it’s specifications state very clearly a ton of limitations that cannot be explained away by legal bickering. (Not even to mention the other complexities like ISO amplification and a myriad of other factors also altering the rolling shutter refresh rate.)

      So, from the manual:

      My suspicion is that it has to do with using an ancient HDMI (and ancient codecs, because WTF is limiting MP4 to 4GB) and also the ties, at the time, of Blu-ray digital file formats compatibility with TVs. Back then, H.264 was still very NTSC/PAL oriented. That was the tail end of interlaced and progressive frame compression.

      I’m completely confident that you are all super duper more intelligenter than Sony engineers. But again, just because it is digital, and just because it is Sony, and just because it was an expensive flagship, doesn’t mean it is magical. There’s a history and a cost in engineering R&D time for making these digital features we take for granted today, that did not exist 11 years ago.

      As for: “TVs now don’t get sync from the mains.” That is true, but did you know that LEDs still refresh their voltage state at a regular interval that is fixed at manufacturing time? Which interval to use will depend on which market the TV is intended for. And, for convenience sake, factories still use NTSC or PAL as standard. This is why TVs are either 50hz or 60hz or 100hz or 120hz, even if they are LED or based on other solid state components. Your attitude is like somehow engineers nullified basic physics, no, they didn’t. They found workarounds so end users don’t have to think about it as much. But the technical constraints are still there. A 50hz TV will show an entirely different viewing experience of a 24fps movie, than a 60hz TV. Even if both are technically using the exact same LED technology, and both are internally DC electricity that is technically independent of the mains frequency.

      • dorkage@lemmy.ca
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        2
        ·
        2 days ago

        I’m not mad at you, I’m just stating you are rambling on about things that makes no sense. Hense the LLM comment I made. I genuinely feel like I’m interacting with an LLM here.

        I’m also not saying I’m smarter than the software engineers that worked on this product. You seem to assume that I think I am.

        You also assume I have an attitude that physics don’t matter.

        You keep talking about mains frequency and TVs which is not related to the topic of formatting a SD card to change from NTSC to PAL. The camera makes its own clock internally arbitrarily FACT. Otherwise, you’d be locked into a single multiple of 1/50 or 1/60 a second as I mentioned in another comment.

        You keep adding side notes “did you know…?” that 1, don’t make any sense, and 2 aren’t even remotely about this original topic.

        You are the one who gives me the impression “I don’t read the other posters comments” and can’t stop and think “hey, maybe I’m wrong here”, but rather you think you need to belittle me and say “I’m completely confident that you are all super duper more intelligenter than Sony engineers.”

        • dustyData@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 days ago

          I’m giving my impressions as I understand them. You are free to disagree, but come at me with technical reasons. Attack the argument, not the person. All I’ve read is “you don’t know what you are talking about, this is bullshit, you are an LLM”.

          None of that disproves my points. Sorry if faced with nothing but ad-hominens I don’t take your comments seriously. You’d understand my frustration.

          The camera makes its own clock internally arbitrarily FACT.

          FALSE, the camera has a set clock, whichever the image processor runs at. It can’t make up new clocks arbitrarily. It has to use technical workarounds to provide a wider range of options for the user, and this creates technical limitations. The physical shutter CAN run at arbitrary shutter speeds, BECAUSE it is mechanical. The rolling shutter CANNOT run at arbitrary shutter speeds, because it is locked to the processor, and whatever the sensor can or cannot do.

          The camera doesn’t set the file format arbitrarily because back then the encoding format couldn’t do it, FACT.

          If you can’t seem to link why I’m talking about this things with OPs question and don’t seem to be able to come with a logical counter argument, have you considered that, hey, maybe you are wrong here?

          • dorkage@lemmy.ca
            link
            fedilink
            English
            arrow-up
            2
            ·
            2 days ago

            Alright, I will admit after reading for a while about how the electronic curtain works on cameras, I was wrong about the clock of the sensor being variable. I assumed the line to line timing was variable, but I was wrong there.

            BUT the main dispute I have here with our engagement is the weird justification you mentioned for requiring FORMATTING an SD card.

            I can understand a reboot for this, but a format? That doesn’t make any sense. I don’t even think I need to reboot my cameras to switch from NTSC to PAL, nevermind a format.

            • dustyData@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              2 days ago

              I was speculating, we are all here together trying to answer OP’s question. As far as I remember, interlacing H.264 used to lead to weird really long processing times. Encoding took a long while as a tradeoff for way faster decoding. Which resulted on the speed of data writes being violently throttled when image processing took too long, not a problem when encoding disk to disk, like burning a video into Blu-Ray for example. But it was a problem when recording from a camera, which risked running out of working memory while frames were still coming in hot from the CMOS. So, engineers resorted to compressing on the storage rather than on RAM, as to free up processing resources, this was called real-time compressing (I know it is a counter intuitive name but software devs aren’t the best at naming things). They wrote pre-compression data directly to storage first, this freed up resources on the processor and RAM side so frames weren’t dropped. Then later, the video would be slowly compressed and the result written, again, in-situ on the final file format. In exchange, this process locked the video processing to the formatting of the physical storage media (stuff like format, block size, addresses and caches).

              I have no basis to affirm whether this is the case on this specific camera. Maybe it is or maybe it isn’t. My best guess is that, either way, Sony engineers just said “fuck it, force the user to reformat, no one is ever gonna change that one setting other than the first time they use the camera”, and just moved on.

              Certainly for more modern cameras—with faster processors, better compression algorithms like HEVC, variable rolling shutter speeds with anti-flicker (even global shutters which are all the rage now) and free from the archaic compatibility issues of NTSC/PAL video signal processors—this is no longer a problem.

      • dual_sport_dork 🐧🗡️@lemmy.worldM
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        2 days ago

        because WTF is limiting MP4 to 4GB

        The answer is 32 bits. Any time you see that 4 gigabyte wall it’s either related to a 32 bit FAT32 file size limitation, or a 32 bit byte counter somewhere running up against its limit. 2 ^ 32 = 4,294,967,296 which is 4 gigs on the nose if we’re talking that many bytes.

        The online scuttlebutt I found indicates that this camera only officially supports the FAT32 filesystem and while it “can” read and write an ExFAT formatted card if said card is formatted externally, it’s not officially supported and Sony says there is “risk of data loss.” The camera itself will not format a card to anything other than FAT32, with all of the limitations that entails.

        One of which is 4 gig files.

        • dustyData@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          2 days ago

          That would make sense. If the image processor is manhandling the storage driver while recording video, and also only supports or expects FAT32. Then forcing an SD card reformat every time the camera initializes is a heavy handed but effective way to ensure video is not lost.

            • dual_sport_dork 🐧🗡️@lemmy.worldM
              link
              fedilink
              arrow-up
              2
              ·
              19 hours ago

              That doesn’t mean that Sony didn’t deliberately jigger it to stop at the 4 gig mark for compatibility purposes, or equally likely apathetically fail to change prior legacy code/firmware not to do so in specific circumstances. The key word from the above commenter there is expecting FAT32.

              The penalty for attempting to cross that mark when a user doesn’t happen to have an ExFAT formatted card in their camera is probably to corrupt the file, certainly at least the last segment of it. One which by definition the user just spent quite a lot of time recording.

              If you format the card in the camera, does it format it as ExFAT? And does it to so for all card sizes, even the small ones? The documentation I found online suggests that it doesn’t, but obviously I don’t have that particular model in my hands to test. I figure you would be in the best position to know, there.