I’ve had one of the original green Benriner mandolines for probably 20 years. It still cuts but I’ve notices that it’s starting to tear through the last 1/8 inch of carrot slices instead of slicing all the way through. I don’t use it every day and mever put it in the dishwasher, but that’s still a crazy good run for a blade.
I would consider getting a replacement blade but I also lost one of the julienne blades and replacing them both would cost more than a new unit. I guess if I get the exact same unit, I can have the option of moving the blade to the old unit if the new ones are aomehow flimsy (I haven’t heard of a drop in quality, but I now assume that half the time, newer is shittier).
Any other Benriner fans in the house?
I have two of them, gave away I think two; it’s wild how pervasive they are as the good version of the tool. I’ve seen so many fancy mandolins with lots of attachments (that do things I don’t really need) break.
They’ve gotten really expensive in the past few years. Like everything else I suppose.
The blades can be sharpened kind of like a plane iron. It’s extremely easy, I’d say even for someone with no experience.
Good to know. I always assumed that anything razor-like would require factory sharpening but IDK why. Clearly people managed to shave back when the only option was a locally sharpened straight razor.
Yes they did! Straight razors are ingeniously designed for sharpening. They’re generally honed with the spine directly on the stone, the tool itself acting as its own reference for an exceptionally consistent angle. That angle is determined at the time of forging.
Mandolines don’t have as many tricks, but they also don’t need to be nearly as sharp. They cut well mostly because of the ergonomics. You could sharpen one with 400 grit sandpaper and get passable results.
Is the blade removable for sharpening? I know most aren’t, but sharpening a long fixed edge is pretty simple
It is removable but it’s more like a razor than a knife. IDK if any local sharpening guys would really be able to get that surgical edge.
If they’re worth a damn, absolutely. It isn’t particularly hard, just fiddly because you cant hold the blade in your hand freely. But anyone doing sharpening halfway seriously is going to have tools for just that kind of job. I think I even have a rig for that kind of thing buried somewhere, but they’re easy to find. In a pinch, all you really need is a stone of appropriate grit and one of those chisel clamps to hold the angle steady.
Ah, that sucks.
Even stropping on that kind of blade can help though, so that might be worth trying.
They can.
I’ve had pros make my pocket knife razor sharp
Sharpening a mandoline blade is like sharpening a chisel or a hand plane. It’s a lot easier than most knives because knives are usually double beveled (with the exception of most Nordic knives and some Japanese knives) and usually they have some curve to the blade.
To sharpen a mandolin blade, buy a pane of glass and a variety pack of wet sandpaper (often sold as “automotive”). The glass pane acts as a flat surface, and the sand paper is just a poor man’s replaceable whetstone. Then you can wet the sand paper, and flatten the back side of the blade by just keeping it flat on the sand paper with steady pressure and going back and forth. Then you can work on the beveled side of the blade. The beveled itself is what you’ll use to dial in the angle. You can put some permanent marker on the edge of the blade, and when it’s disappeared, you’ll know you are done with that grit. You then just repeat the process with 2 or 3 grits of paper, getting finer each time.
This link shows the process for a chisel, though they use an angle guide, which isnt necessary, and they also use rougher grit than you’d want to use. https://www.familyhandyman.com/project/how-to-sharpen-a-chisel/
Every restaurant I’ve worked in uses Benriner mandolins. Probably for good reason.


